Cybex Troubleshooting
3 articles
Cybex Treadmills, Out of Order Message
The Out of Order message can appear on your Cybex treadmill 2 ways that are not related to an error condition. The Dormant Mode has been set to Out of Order. This is done if the treadmill is down for maintenance or service, parts may be on order for repair, etc. Out of Order can appear if the power...
Cybex Treadmills, Error 93, Over Voltage
Probable Cause: Drive’s internal boost circuit is reporting >400V DC on the bus. Corrective Action: Verify line voltage isn’t spiking. Check the internal AC wiring of the treadmill. Verify correct voltage controller is used with regard to power at the outlet. Replace the Drive Controller if the...
System Stall Error on Cybex Bikes, The Bike, SEMI, 3610, 3670
Error Code: System Stall Manufacturer: Cybex Model: 3610, 3670, 3710, 3770, The Bike and SEMI Error Description The system will not calibrate. Possible Reason Belt worn, broken, or off of the flywheel. Recommended Action Inspect belt. Replace if necessary. Re-test.